Croplands Fan Sprayer - Kiwiliner

Fan Sprayer

The 2000 litre Kiwiliner model has been specifically developed for the needs of kiwifruit  growers
Using the time-proven Cropliner 2000 litre fibreglass model as a base, the new 2000 litre Kiwiliner model has been specifically developed for the needs of kiwifruit  growers.  The key to the design is the 820mm front air entry fan. Being fully constructed of stainless steel, with polycarbonate fan blades, corrosion should not be an issue.  Air is drawn from the side of the sprayer just behind the rear of the tank, and exits right at the back of the fan where it picks up the spray-laden air to be delivered to the canopy. Air deflectors at the base of the fan assist in directing air upwards towards the canopy. Stainless steel spray lines and 18 brass roll-over nozzle bodies complete the package.

KEY FEATURES
  • Front intake fan – reduces litter blockage
  • Reduce horsepower demand by up to 17% – significant fuel saving
  • Noise reduction by up to 8 Db – more opportunity to spray
  • Improved utilisation of air – better coverage to maximise disease control
  • There are no features available

BASE MODELS

ORDER CODE PRODUCT DESCRIPTION
HT2000-920DSV Cropliner 2000 litre, AR170 BHS brass pump, 920DSV fan, fibreglass tank model
HT2000-820SV Cropliner 2000 litre, AR170 BHS brass pump, 820SV fan, fibreglass tank model
HT2000-820FE Cropliner 2000 litre, AR170 BHS brass pump, 820mm front entry fan, fibreglass tank model

 
Manual remote mounted ARBMH50 controller standard.
Options:

  • Electric – Braglia high pressure solenoid valves
  • Bravo 180 auto-rate controller
  • MT3405 auto-rate controller
  • HV4000 auto-rate controller and optional data logger
820FE FRONT ENTRY FAN - FEATURES AND SPECIFICATIONS
  • Stainless steel construction – 2mm 316-grade stainless steel volute and rear plate
  • Bottom stainless steel air deflectors fitted
  • 2-speed heavy duty gearbox – single lever control for gear selection, with neutral. 540RPM input, 1:4 low gear ratio, 1:5 high gear ratio
  • Variable pitch fan blades, three settings – 24, 42 and 50 degrees. Standard set at 42 degrees
  • Stainless steel nozzle tubing 21mm O.D., 15mm I.D.
  • Centrifugal clutch assembly, 175mm diameter, fully serviceable running on steel drum insert in the clutch hub
  • Safety guards for intake and exit of air
  • Ten fully brass swing-over nozzles per side utilising twin spray rings
920DSV FAN - FEATURES AND SPECIFICATIONS
  • Stainless steel construction – 2mm 316-grade stainless steel volute
  • Adjustable air direction vanes on the upstream side of the fan
  • 2-speed heavy duty gearbox – single lever control for gear selection, with neutral
  • Variable pitch fan blades, three settings – 25, 35 and 45 degrees. Standard set at 35 degrees
  • Stainless steel nozzle tubing 21mm O.D., 15mm I.D.
  • Centrifugal clutch assembly, 175mm diameter, fully serviceable running on steel drum insert in the clutch hub
  • »»Safety guards for intake and exit of air
  • 14 fully brass swing-over nozzles per side utilising twin spray rings
  • Lower horsepower requirements and fuel consumption
No location available
Make: Croplands
Condition: New
Category: Spraying Equipment
Back to top