linkage for larger farms


»» Heavy duty epoxy-powder coated frame with 3 linkage points – category II and III
»» 1000mm integrated hydraulic lift device
»» Translucent white polyethylene UVstabilised tank with volume markings, hinged lid, filling strainer and drain.
»» Integrated 170 litre flushing tank and 15 litre handwash tank
»» Storage locker for storing protective clothing
»» 135 L/min Annovi Reverberi positive displacement 0–20 bar pump
»» 3 section idrominus pressurecompensating manual control unit is fitted standard
»» Suction filter with shut-off valve allowing filter to be cleaned without draining the tank
»» Forklift points to allow lifting with a fork hoist
»» Access step


»» 3 or 5 section in-cab on/off electric controls with electric pressure adjustment and master switch
»» Fully automatic spray rate control for up to 7 sections
»» Hydraulic pump drive in lieu of PTO drive
»» Side mount hose reel for up to 100 metres of hose capacity
»» 30 litre chemical mixing unit
»» Manual folding booms from 8 metres up to 12 metres
»» 12 or 15 metre Hydralink hydraulic “X-fold” galvanised boom with a locking self-levelling device.
»» 16, 18 or 21 metre BDL series hydraulic side-folding boom options with automatic cable-locking self-levelling device. Airbag boom suspension fitted.  A wing-lift version of this boom is also available with in-cab switchbox for hydraulic functions
»» Hydraulic kit for individual outer wing fold for BDL style booms – allows boom to be “short-folded”
»» Triplex nozzle bodies complete with 02, 03 and 04 AirMix® tips – these sizes can be changed to suit your application.  Note – all Croplands booms come with AirMix® air-induction drift reducing nozzles standard
»» Manual or electric fence-line nozzle can be fitted to booms (right hand side)
»» Pump suction kit (Camlok on 3-way valve by suction filter for external suction using the liquid pump)
»» GPS Guidance
see ‘ other comments’ tab for further information

  • There are no features available


  • White polyethylene UV stabilised tank, with calibrated sight gauge, large filling lid and basket strainer
  • Tank and frame unit is designed to bring weight as far forward as possible for maximum safety and weight transfer onto rear wheels of the tractor
  • 2” Camlok top-mounted quickfill point for filling main tank (flushing and hand wash tank filled externally)
  • 15 litre fresh water hand wash tank standard
  • 170 litre flushing tank with integrated clothes locker fitted standard
  • Tank agitation (Venturi type) fitted, driven from pump manifold


  • Steel frame for maximum strength and durability, epoxy coated for corrosion resistance
  • 1000mm hydraulic lift device integrated as part of the main frame for boom lift
  • Fixed height step for access to top of tank if needed
  • Slide-out supports for parking when unit not in use
  • Forklift points integrated into base of frame


  • Category I and II linkage points standard


  • AR135 (135 L/min, 0–20 bar), PTO driven positive displacement, oil bath diaphragm pump with chemical resistant diaphragms (optional AR160 pump available)


  • Optional suction probe for drawing chemical straight from containers into main tank


  • Galvanised BDX Hydralink booms in 12 and 15 metre configuration can be fitted
  • Booms fitted with AirMix® 02 air-induction low drift nozzles standard
  • Nozzle protection fitted to boom with stainless steel boom lines for easy clean-out


  • Manual-tap 3-section controller fitted standard
  • Optional electric controls with 3 section motorised boom valves, in-cab console and electric pressure control fitted – master switch for switching all sections off simultaneously
  • Optional: Bravo 180 automatic spray rate controller


3 filtration points:

  • Basket strainer 18 mesh
  • Large suction filter 50 mesh
  • Nozzle strainers 50 mesh
Make: Croplands
Condition: New
Category: Spraying Equipment
Back to top